Powder Recovery System

Product Details:

The powder spray cum recovery booths provide efficiency of over sprayed powder and are made using modular panel, factory preset that enable easy transportation and installation. These can be fitted with overhead conveyors, trolley, lose tracks. The key features of the system that make it perform superiorly are:

• Recovery: The constant suction of the sprayed powder with balanced impeller reduces powder loses
• Transfer Efficiency: The uniform and smooth air flow pattern charged powder from gun covers the object, causing greater transfer efficiency
• Easy Cleaning: The air flow pattern sweep the booth walls for checking any powder accumulation on them.

• The price range varies between 15 Lakhs to 1 Crores

• Minimum Order Value : 20 lakhs

Product Details:

Usage of the cartridge for recovery is a newer technology. But choosing the correct cartridge for powder recovery is very critical. We stress upon only paper cartridge filter with pleating and the specification is each cartridge is capable of handling 1200 CMH of air. However, depending on the suction capacity of the blower the number of cartridges shall be derived. Here the powdered particle (both heavier and finer) hits the outer surface of the cartridge and gets filtered. The air will get sucked into the inner tube of the cartridge. The cartridge system need to have a reverse pulse cleaning system. The reverse pulse cleaning sends pulses of compressed air at a very high velocity into the inner tube of the cartridge. This make the powder to fall into the collection hopper and cleans the pores of the cartridge. Here the recovery efficiency is 98 to 99.99% Max. The only drawback is, you need to have a separate set of cartridges for each color. This means more investment. But the booth cleaning time reduces drastically compared to the cyclone recovery system. The system resistance is less compared to cyclone recovery and the power consumption is less when in comparison.

Product Details:

The multi–cyclone is a typical cyclone but smaller in size. Depending on the suction capacity blower, number of cones shall be derived. It is a newer technology compared to mono cyclone. As explained earlier, the cyclonic effect, inside the cyclone, heavier particles will fall down and the finer particles will enter the after filter system/go out into the atmosphere. Here the recovery efficiency is 95 to 97% max. So you will be saving 8 to 10% of powder every day, every minute compared to Mono cyclone. But the system resistance is more compared to mono cyclone and the power consumption is slightly higher. In this, cleaning becomes easy because of the easy accessibility.